Replacement Filter Bundle for Airpura 900

Full refresh in one box—restore airflow and odor control

Everything you need to bring your Airpura 900 back to peak performance. Swap the MERV-13 particle filter, 20-lb Super-Gas carbon canister, and two prefilters to quickly improve suction and remove smoke, VOCs, and odors. Top-access design makes changes fast.

BENEFITS

• One-and-done kit for a complete service.
• Restores suction and fine-particle capture (MERV-13).
• Heavy 20-lb carbon removes many fumes and odors.
• Easy top access: unlatch, lift, replace—no tools.
• Clear replacement cues: change when suction drops or off-gassing is noticeable. 

In the Box & Installation

• (2) Prefilters – sit inside the particle filter to catch larger debris.
• (1) MERV-13 Industrial Particle Filter – captures fine dust/smoke.
• (1) Super-Gas Activated Carbon Filter (20 lb) – targets VOCs/odors.

Install steps (about 10 minutes)

1. Power OFF and unplug the unit; remove any hose/arm from the top inlet.
2. Unlatch four top latches; lift off the top and foam gasket.
3. Lift out used filters; bag and discard per local rules.
4. Vacuum/wipe the compartment; insert new filters; re-seat gasket; relatch.
5. Restore power; run on MAX briefly to confirm airflow.
   

FAQs

Will this bundle fit the 900 MAX?
No, this bundle is sized/quantified for the Airpura 900. The 900 MAX uses two particle filters and two carbon canisters (40 lb total). Order MAX-specific quantities for that model.

How often should I replace these filters?
Intervals depend on load. Replace prefilter/particle when suction drops; replace carbon when off-gassing is noticeable or odors break through. Heavy contamination can require changes within weeks.

Any safety tips during service?
Yes, the carbon canister is heavy; lift with care. Keep humidity ≤50%; do not use the unit in flammable atmospheres; ensure the unit is OFF before plugging in.

FOR USE:

• Airpura 900 Industrial Fume Extractor
• Airpura 900 MAX Heavy Industrial Fume Extractor