/eh/2025-01-08/173633966714069467/picture.png)
/eh/2024-12-24/173503345348979036/Favorite-Icon.png){kind=icon}
/eh/2025-07-08/1751962110204480194/picture.png)
/eh/2025-06-21/1750485478958537574/countryInfoIcon.png)
/eh/2025-06-21/1750485741321434291/Hi-Sign-in-My-Nihao.png)
/eh/2025-06-21/1750485837193896318/cart.png)
/eh/2025-06-21/1750485968202533847/cart.png)
/eh/2025-04-17/1744862476612819675/hot-img.png)
/eh/2025-11-07/1762504524550532584/header-icon.jpg){kind=icon}
/eh/2025-07-07/1751875582852206790/header-icon.png){kind=icon}
/eh/2025-07-07/1751875587886277738/header-icon.png){kind=icon}
Best in 7 days
- Model: BC-1573
- Polyurethane Foam Applicator Gun
- CE certification
- Power Source:Manual
- Gun Trigger Material:Steel with Non-Stick PTFE Coating
- Gun Tube Material:Steel with Non-Stick PTFE Coating
- Size:750ml & 500ml
- Gun Dimensions: 32.5cm (L)x 20cm(W)
- Tube Length: 18.5cm
- Nozzle Diameter: 2mm
- Gun End Nozzle:Brass
- Gun Colour: Black and Red
Features
- Ergonomic Design
- Double Colour Rubber Handle
- Non-Stick PTFECoated for easy, non scratch cleaning.
- Corrosion and wear resistant
- Sprung control trigger
Package
- Comes packed in a cardboard triangle box.
- 1 x PU Foam Applicator Gun
- 1 x Plastic Tube
- 2 x Plastic Nozzle
Directions for use of the foam gun
- Take a can of gun foam and shake vigorously.
- Screw can on to adapter of gun(not too tight).
- Release the flow adjustment screw lightly and dispense foam immediately to fill the entire gun with foam.
- The foam gun i snow ready to use.
- Foam output can be controlled with flow adjustment screw.
- Leave gun filled with foam after use.Always keep a filled can of gun foam on the gun.
- Tighten the flow adjustment screw completely.Do not empty the gun.Gun must always be filled with foam,otherwise foam is cured due to the humidity in the air.
- Put can away in a vertical position(gun upwards).
- Shake the can vigorously(keep hold of the gun).
- Remove cured foam at the tip of the nozzle carefully with a small,sharp knife.
- Release the flow adjustment screw lightly and dispense foam immediately until the flow of foam is correct.
- The gun is now ready to use.
- Foam output can be controlled with trigger of the gun.
- Check if the can is empty by dispensing foam in a dust-bin until no more foam is released.
- Take a new can of gun foam.Shake vigorously.
- Unscrew the empty can(keep valve opening away from you),remove released foam from adapter and replace the empty can immediately by a new one.
- Dispense foam immediately to fill the extension tube.
Cleaning of the foam gun at times of interruption
- Unscrew the can of gun foam (keep valve opening away from you).
- Take a can gun cleaner and screw the can on the gun.
- Pull the trigger again to refill the gun with cleaner.
- Cleaner has to remain in the gun for about 5 minutes.
- Pull the trigger again to refill the gun with cleaner.
- Unscrew the can gun cleaner.
- Screw the can gun foam onto the gun.
- Pull trigger of the gun again until foam is released and cleaner completely removed.
- The gun is now ready to use.
