FD75200 Waterproof ESC

Specs:

 Voltage:14-75V( safe for 3-16S)

 Continuous Current : 200A

 Max Current :300A

 Supported sensors: ABI, HALL, AS5047,AS5048A

 EPRM:150000

Feature:

 Regenerative braking

 Sensored or sensorless operation + hybrid mode

 Configurable RPM-, current-, voltage- and power limits

 Input source: PPM, Analog, NRF Nyko Kama Nunchuck

 Communication ports: USB, CAN, UART

 Throttle curve and ramping for all input sources

 Seamless 4-quadrant operation

 Motor revolution, amp hour, watt hour counting

 Real time data analysis and read out via communication ports

 Adjustable protection against:

 Low input voltage

 High input voltage

 High motor current

 High input current

 High regenerative braking current (separate limits for the motor

    and the input)

 High RPM (separate limits for each direction)

 Digital VCC and analog VCC are produced by different voltage regulators         

    respectively to make the system AD conversion more accurate

 Motor wire: 8AWG

 Power cable: 6AWG

FD65162 100KV/120KV waterproof motor

VX3 Waterproof Remote Control

Feature:

1.6-inch super clear and big screen display

Display shows more: Except for basic telemetry data, it also display GPS, motor power, real-time temperature of MOS tube, and throttle progress bar information

Be compatible with VESC and Non-VESC

ESK8 mode / E-surf mode switching freely

Esurf mode：Cruise speed control function

Waterproof IP rating: IP67

Bigger remote battery capacity:1500MA

ESC failure report ：Detect possible failures of the ESC in time for replacing

Controller mode: PPM/UART

Charging way:Wireless Magnetic Charging

VX3 Remote comes with Receiver

Remarks: For remote VX3, it is recommended to wash it with fresh water or soak it in fresh water for at least one minute after using to reduce salt residue and extend the service life of the remote.

Packahe include:

FD65162 motor*1

FD75200 ESC*1

VX3 remote controller*1

7 inch propeller*1

8.0mm bullet connectors*3

M8 screw*2