Blackfriar Water-Based Floor Sealer – Clear Sealer for Porous Surfaces

Blackfriar Water-Based Floor Sealer is a clear, water-borne sealer designed for use under Professional Acrylic Floor Paint on porous surfaces. It penetrates, binds, and seals floors and masonry, providing a stable foundation for overcoating while also functioning as a dust proofer.

Key Features:

• Penetrates and seals porous surfaces for overcoating

• Can be used as a dust proofer

• Suitable for bare concrete, brick, and masonry floors

• Water-based for easy application and cleanup

• Ideal for use under professional acrylic floor paints

Application Information:

• Coverage: 10–15 m²/L per coat

• Hard Dry: 2–4 hours at 20°C

• Thinning: Consult technical data sheet

Surface Preparation

Surfaces should preferably be as dry as possible. Emergency patch repairs can Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete must be left for at least 6 months before applying Blackfriar Professional Solvent Based Floor Sealer.

Technical Data

• Specifically designed to seal bare and porous concrete substrates.
• Use prior to coating with Blackfriar Professional Polyurethane Floor, Anti-Slip, and Anti Climb Paints.
• Also suitable to apply under solvent based masonry paints.
• Brush or roller application.
• Indoor and outdoor use.

Directions for Use

Stir thoroughly before use. Apply with a brush or roller working the paint in any surface imperfections. Blackfriar Professional Solvent Based Floor Sealer is not suitable for use over non porous substrates like PVC, thermoplastic tiles, quarry tiles, asphalt floors or granolithic concrete. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions. Do not apply in cold (below 10°C), damp or humid conditions. If concrete floors are very smooth then pre-treat with Blackfriar Professional Acid Etch followed after thorough rinsing by Blackfriar Professional Solvent Based Floor Sealer.

Data Sheets

Blackfriar Floor Sealer WB TDS

Blackfriar Floor Sealer WB MSDS