Function 1: Automatic lock function The door will be locked at speeds of 10km/h to 15km/h or by "D" shift. You can change the door lock timing according to your preference. *In the case of gasoline-powered vehicles, it is designed to read the rotational speed and lock it. Therefore, the timing of locking will vary depending on how much you press the accelerator pedal, etc., but it will lock at approximately 10km/h to 15km/h. Function 2: Automatic lock release function If you put the shift lever in "P", the lock will be released automatically! Allows passengers to get on and off smoothly. Or you can switch to unlocking by turning off the engine. This is recommended for those who do not want to release the lock until the engine is turned off. Function 3.Answer backlight function (with ON/OFF switch) When you turn off the engine and open the door for the first time (first time only), the small light will turn on for 10 seconds. Also, when you perform an unlock operation (when you press the unlock button on your car once with the smart key), the small light will turn on for 10 seconds. It may not be possible to use this product due to conflicts with third-party products. This is not a product defect, so you may not be able to use this function. Also, if the function is turned on, the remote park function, which is a manufacturer option, cannot be used. If you regularly use the remote park function, please turn off the answer backlight function. Please be aware of this before purchasing.Function 4.Automatic door unlocking in case of emergency *Activates when sudden deceleration is approximately 40km/h or more. (60km/h to 20km/h or less) Release the lock to prepare for an emergency and avoid the risk of being trapped when escaping in an emergency situation. *The time required to decelerate for normal operation varies depending on the vehicle model. Please note that it may not operate even when braking suddenly. *This function cannot be turned off. ■For gasoline vehicles, the lock release function during sudden braking is not applicable. This function is only available for hybrid vehicles. Please understand this before purchasing. Complete coupler ON design! All wiring has couplers, so you don't have to cut the wiring, and you don't have to use an electro-tap, so you don't have to worry about damaging the wiring! To install, just insert the coupler by inserting the connector under the steering wheel and the connector in the driver's foot panel! ! Do your children open the door in a hurry and freeze? No more worries! Both the driver and passengers can ride safely and securely. Click here for installation video → https://www.youtube.com/watch?v=3PtIjQklNG0




Manufacturer: ‎Enlarge Shoji Co., Ltd.
Part number: ‎lock -13
Product weight: 60 g
Package size: 25.2 x 18.8 x 2.5 cm; 60 g
Plug profile: Handlebar mount
Battery usage: No